COMMENTS:

1. This EEPROM package is for AOC-STG-i2T
2. Changed SVID to 15D9 in EEPROM files


EEPROM REVISION INFO:

6) STGI2T2A (3/19/2012)
	1. SMC rev. 2.0A
	2. Disable WOL function on both ports

5) STGI2T20 (3/05/2012)
	1. Package rev. 2.0
	2. Update batch file
	3. Change word 0x2Ch to FFF5h to enable WOL on both ports
	4. Change word 0x38h to 014Fh to enable WOl on port 2

4) STGI2T1C (02/23/2012)
	1. Package rev. 1.0C
	2. Set iSCSI to enable as default setting
	3. Enable bit 5, offset 0x04h to support S1 WOL

3) STGI2T1B (02/07/2012)
	1. Rev. 1B
	2. Set bit 11 of word 0x10 to disable (from 0C00h to 0400h) to support NIC mode

2) STGI2T1A (01/19/2012)
	1. New LAN EEPROM Based on X540 MNG NO MNG B0 v4.3.bin with changes from STGI2T1 image.
	2. Update batch file

1) STGI2T1: (01/05/2012)
	1. New LAN EEPROM Based on X540B01 EEPROM
        2. Following words to disable default PXE boot (NIC)
                Word 0x30 set to 0101h
		word 0x34 set to 0101h
        3. Following words to Enable iSCSI, PXE, and FCoE
                Word 0x33 set to 4033h
        4. Following words for SAN MAC Addresses Pointer (Rev. B0)
                Word 0x28 set to 059D
        5. Following words for The PCIe Expansion/Option ROM pointer of AOC-STG-i2T
                Word 0x05 changed from 8180 to 8060
        6. Following words for Port 1 Link LED color of AOC-STG-i2T
                Word 0x265 changed from 0500 to 4140
                Word 0x266 changed from 0104 to 4584
        7. Following words for Port 2 Link LED color of AOC-STG-i2T
                Word 0x26D changed from 0500 to 4140
                Word 0x26E changed from 0104 to 4584